twistedvilla.blogg.se - Tunematic antenna tuner

#Tunematic antenna tuner generator#
#Tunematic antenna tuner manual#
#Tunematic antenna tuner code#

At the same time, an ALC generator inside the interface box sends a negative voltage (depending on how you adjust the pot) to reduce the power to a safe tune level (10-15 watts). When this port sees a ground, it places the rig into 100w CW tune mode. TuneMatic interfaces with your radio through the accessory port keyline.

Those settings do not matter with TuneMatic operation. Yaesu FT857/897/991/891 changing the ALC settings to work with TuneMatic : Secondly, by using our own controls, it enables TuneMatic to operate on both current and legacy rigs, as many legacy rigs are not equipped with a tune function. This makes TuneMatic universal, regardless of the rig. Rather than try to manipulate and decode the protocols, which on occasion, may not be reliable, TuneMatic contains a small remote button panel, which contains all the functions necessary to operate TuneMatic with your rig. Most of the time, there are sophisticated communications protocols between the rig and the tuner.

Factory options for interfacing various radios.TuneMatic technical notes from actual emails received and responded to (updated )Īlthough many rigs contain a ‘tune’ button, they are typically designed to interface with a manufacturers recommend tuner.

Amplifier bypass relay option disables external amp keying during tune mode.

#Tunematic antenna tuner code#

Audible Morse code alert and status messages.

Cold weather compensation for motor variations (user adjustable).

Variable motor control for fine-tuning (manual & automatic modes).

Antenna protected by motor over-current, soft limit, and missing pulse detection.

Programmable motor current limit sensing – from 0.2A thru 1.7A.

Self-calibrating antenna PARKING feature.

Up to 3000 memories - over 50 years retention with over 1,000,000 read/write cycles.

Continuous 1 thru 60 MHz operating frequency range, 200W CW power.

#Tunematic antenna tuner manual#

Supports manual and automatic modes – user has full control of all operations.

Employs frequency, motor pulse, and VSWR sensing for accurate tuning results.

All remote lines optically isolated for maximized RF protection.Backlit wired remote button assembly provides all necessary functions.Utilizes self-learning technology the more it stores, the smarter it becomes.Factory supplied interface for specific rigs provides automatic rig control.Universally supports both current and legacy HF transceivers.TuneMatic is independent of radio make and model and will support any HF radio with a PTT control line and switched power. Position measurements of the antenna to obtain the proper tuning, and keeps track of the parameters of the antenna by storing the tuning data in a series of internal reserved memory banks, based on frequency and bandwidth. TuneMatic utilizes frequency, VSWR detection and pulse TuneMatic operates over a range of 1-60MHz, and supports a wide variety of screwdriver-type tunable antennas. TuneMatic is a self-contained antenna controller which will automatically adjust the acceptable resonant frequency of a screwdriver/motorized antenna. Requires The Purchase Of An Additional Interface Cable - See Accessories Below, HRO Will Pay The Shipping Charges To Get This Cable To You!